What's a Ride-On Mower / Lawn Tractor Worth in Scrap?
Based on current Australian scrap yard rates and a typical ride-on mower / lawn tractor's metal composition. Actual yard offers vary by city, load size, and material condition.
Component breakdown
A typical ride-on mower / lawn tractor weighs 230kg total. Here's where the value comes from — sorted by component, with the metal type, grade, and estimated payout.
| Component | Metal & grade | Weight (kg) | Est. mid value (AUD) |
|---|---|---|---|
| Frame, deck, and cast iron engine block | Steel · Heavy Melting Steel (HMS) | 180.0 | $13.61 |
| Some engine components, pulleys | Aluminium · Cast Aluminium | 12.0 | $29.90 |
| Alternator and starter motor windings | Copper · #2 Copper | 3.0 | $31.31 |
| Battery (if included) | Lead · Lead-Acid Batteries | 8.0 | $6.77 |
Before you take it in
A few minutes of preparation can lift the value toward the high end of the estimated range.
- → Drain fuel, oil, and any hydraulic fluid
- → Remove the battery and sell separately — handled differently from main scrap
- → If the engine is salvageable, parting it out often beats scrap value
Safety & legal notes
Drain all fluids before scrapping. Battery must be separated and sold under lead-acid handling rules.
Where to sell a ride-on mower / lawn tractor
Any scrap yard accepting the relevant metals will buy a ride-on mower / lawn tractor. Use our city directory to find yards in your area and see region-specific rates — payouts in regional and remote areas are typically lower than capital cities due to transport costs.
For larger items, call ahead to confirm pickup arrangements or weighbridge access. Most yards have minimum drop-off weights.
Other outdoor & australian items
Frequently asked questions
How much is a ride-on mower / lawn tractor worth in scrap? +
A ride-on mower / lawn tractor is worth approximately $69.34 to $93.81 AUD in scrap value, with a mid estimate of $81.59. The exact amount depends on the city you sell in (yards in remote cities pay less due to transport costs), the condition of the components, and how well the item is prepared before drop-off.
What metals are in a ride-on mower / lawn tractor? +
A typical ride-on mower / lawn tractor contains 180kg of steel, 12kg of aluminium, 3kg of copper, 8kg of lead, totalling about 230kg. The copper component contributes the most value (around $31.31), even though it's not always the heaviest.
How do I prepare a ride-on mower / lawn tractor for scrapping? +
Several steps lift the return: (1) Drain fuel, oil, and any hydraulic fluid (2) Remove the battery and sell separately — handled differently from main scrap (3) If the engine is salvageable, parting it out often beats scrap value
Where can I sell a ride-on mower / lawn tractor for scrap? +
Any scrap yard accepting the relevant metals will buy a ride-on mower / lawn tractor. See our <a href="/cities/">city directory</a> for region-specific yards and rates. Larger items may need pickup arrangement or weighbridge access — call ahead to confirm hours and acceptance.
Is it worth scrapping a single ride-on mower / lawn tractor? +
At $81.59 mid estimate, a ride-on mower / lawn tractor is generally worth scrapping. Proper preparation can lift the value toward the high end of the range — see the prep tips above.
Are there any safety or legal considerations with scrapping a ride-on mower / lawn tractor? +
Drain all fluids before scrapping. Battery must be separated and sold under lead-acid handling rules.