Scrap Aluminium Prices in Mount Gambier
Scrap aluminium in Mount Gambier currently pays from $1.83 per kilogram for aluminium cans (ubc) up to $2.64 for aluminium extrusion. Mount Gambier is a regional centre in South Australia, with rates set by transport distance to the nearest capital and smelter network.
Aluminium grades and payouts in Mount Gambier (per kg)
Estimated yard payouts for each grade, based on the current LME spot ($4.67/kg) and Mount Gambier's 0.87× regional adjustment. Actual offers vary by yard, load size, and material quality.
| Grade | Payout rate | Est. mid (AUD/kg) | Range |
|---|---|---|---|
| Aluminium Extrusion Clean, uncoated aluminium profiles used for window and door frames. Highest-paying common aluminium grade. | 65% | $2.64 | $2.24 – $3.04 |
| Cast Aluminium Cast aluminium components, typically thicker and used in automotive or industrial parts. Pays slightly less than extrusion due to alloy variability. | 55% | $2.23 | $1.90 – $2.57 |
| Aluminium Sheet Rolled aluminium sheet, often used in roofing, signage, or vehicle panels. | 50% | $2.03 | $1.73 – $2.34 |
| Aluminium Cans (UBC) Used beverage containers. Lowest aluminium grade because of paint, varnish, and steel-end contamination. Earn more via Container Deposit Scheme if available in your state. | 45% | $1.83 | $1.55 – $2.10 |
Price history
Local Mount Gambier prices track the national aluminium series — multiply by 0.87 for Mount Gambier equivalents. View the full 30-day chart on the national aluminium page.
Aluminium in Mount Gambier
Mount Gambier's forestry, dairy, and Limestone Coast agriculture support consistent regional yard volumes.
As a regional centre, Mount Gambier's aluminium flow comes primarily from residential renovations, local trade work, and rural property clearances. Yards in Mount Gambier consolidate volume for shipment to processing facilities in larger centres.
Scrap yards in Mount Gambier that buy aluminium
1 verified scrap yard in the Mount Gambier area. Browse all yards in Mount Gambier →
Frequently asked questions
What's the current price for scrap aluminium in Mount Gambier? +
Today's estimated payouts in Mount Gambier range from $1.83 per kilogram (aluminium cans (ubc)) up to $2.64 (aluminium extrusion). Prices update daily and reflect Mount Gambier's 0.87× regional adjustment from the Sydney benchmark. See the grades table above for all payouts.
Where can I sell scrap aluminium in Mount Gambier? +
We're building a verified directory of Mount Gambier scrap yards. Until that's live, call 2-3 yards in your area before transport. Most Mount Gambier yards accept aluminium in all common grades, though smaller yards may have minimum weight requirements. For larger loads, also consider yards in Adelaide.
Why does Mount Gambier pay 13% less than Sydney for aluminium? +
Transport cost. Aluminium sold in Mount Gambier eventually travels to a smelter or export port — typically via Adelaide — and yards price the freight cost into their offer. The 0.87× regional adjustment models this transport drag based on observed yard rates and distance to processing facilities.
How is aluminium graded at Mount Gambier yards? +
Mount Gambier yards use the same grading system as the rest of Australia: Aluminium Extrusion, Cast Aluminium, Aluminium Sheet, Aluminium Cans (UBC). The grade depends on cleanliness, alloy purity, and contamination. See our complete <a href="/metals/aluminium/">Aluminium grading guide</a> for what each grade means, examples, and how to identify it.
Do I need ID to sell aluminium at a Mount Gambier yard? +
Yes for any non-ferrous scrap. South Australia legislation requires yards to record seller ID on regulated transactions to deter metal theft. Bring a driver's licence or other photo ID. Cash payments above certain thresholds may require additional documentation.
Is it worth driving from Mount Gambier to a bigger city for higher aluminium rates? +
Generally no, unless you have a very large load. Fuel costs from Mount Gambier to Adelaide quickly eat the rate difference, especially for a single residential load. The exception is high-value loads of clean copper or brass — for loads above a few hundred kilograms of clean material, the maths can work out. For everything else, consolidate locally and accept the 0.87× rate.