Scrap Stainless Steel Prices in Launceston
Scrap stainless steel in Launceston currently pays from $1.09 per kilogram for 304 stainless up to $1.19 for 316 stainless. Launceston is a regional centre in Tasmania, with rates set by transport distance to the nearest capital and smelter network.
Stainless Steel grades and payouts in Launceston (per kg)
Estimated yard payouts for each grade, based on the current LME spot ($2.38/kg) and Launceston's 0.83× regional adjustment. Actual offers vary by yard, load size, and material quality.
| Grade | Payout rate | Est. mid (AUD/kg) | Range |
|---|---|---|---|
| 304 Stainless The most common stainless grade — 18% chromium, 8% nickel. Used in kitchen sinks, food equipment, and general fabrication. | 55% | $1.09 | $0.92 – $1.25 |
| 316 Stainless Marine grade — adds 2-3% molybdenum to 304's composition for higher corrosion resistance. Pays more due to molybdenum content. | 60% | $1.19 | $1.01 – $1.36 |
Price history
Local Launceston prices track the national stainless steel series — multiply by 0.83 for Launceston equivalents. View the full 30-day chart on the national stainless steel page.
Where these numbers come from
| Figure | Value | Source | Type | Checked |
|---|---|---|---|---|
| Stainless Steel spot price | A$2.38/kg | Calculated: 8% nickel (MetalpriceAPI) + a fixed A$0.50/kg chromium allowance | Our calculation, partly a fixed estimate | |
| Launceston regional factor | 0.83× | Our model (freight distance and yard rate differences) | Our estimate | |
| Stainless Steel grade payout rates | 55% / 60% | Our estimate from published yard rate cards | Our estimate |
Spot prices are converted to Australian dollars per kilogram. Yard payouts are our estimates (spot × grade payout rate × regional factor), not quotes from any yard. The chromium allowance is a fixed figure set on 2026-05-16, not a market price. Full detail: methodology.
Stainless Steel in Launceston
Launceston is Tasmania's industrial hub for the north — TEMCO's manganese smelter at Bell Bay anchors regional metal flows. Local yards face the same shipping-cost drag as Hobart.
As a regional centre, Launceston's stainless steel flow comes primarily from residential renovations, local trade work, and rural property clearances. Yards in Launceston consolidate volume for shipment to processing facilities in larger centres.
Scrap yards in Launceston that buy stainless steel
4 scrap yards listed in the Launceston area. Browse all yards in Launceston →
Frequently asked questions
What's the current price for scrap stainless steel in Launceston? +
Today's estimated payouts in Launceston range from $1.09 per kilogram (304 stainless) up to $1.19 (316 stainless). Prices update daily and reflect Launceston's 0.83× regional adjustment from the Sydney benchmark. See the grades table above for all payouts.
Where can I sell scrap stainless steel in Launceston? +
Check the Launceston yard directory for addresses and phone numbers, then call 2-3 yards before transport. Most Launceston yards accept stainless steel in all common grades, though smaller yards may have minimum weight requirements. For larger loads, also consider yards in Hobart.
Why does Launceston pay 17% less than Sydney for stainless steel? +
Transport cost. Stainless Steel sold in Launceston eventually travels to a smelter or export port — typically via Hobart — and yards price the freight cost into their offer. The 0.83× regional adjustment models this transport drag based on observed yard rates and distance to processing facilities.
How is stainless steel graded at Launceston yards? +
Launceston yards use the same grading system as the rest of Australia: 304 Stainless, 316 Stainless. The grade depends on cleanliness, alloy purity, and contamination. See our complete <a href="/metals/stainless/">Stainless Steel grading guide</a> for what each grade means, examples, and how to identify it.
Do Launceston scrap yards require photo ID? +
Section 9 says a dealer must not receive goods unless the seller produces documentary proof of identity showing their correct name and address. The Act sets no points system, weight or value threshold, so expect to show ID for any sale to a dealer covered by the Act. (No scrap-specific Act. The Second-hand Dealers and Pawnbrokers Act 1994 applies and does not mention scrap metal specifically. Dealers do not hold a licence but must give the nearest police station at least one month's written notice before starting business.; last checked 2026-09-02.)
Can I be paid cash for scrap metal in Launceston? +
No cash ban. The Act contains no payment method rules. (Last checked 2026-09-02.)
Is it worth driving from Launceston to a bigger city for higher stainless steel rates? +
Generally no, unless you have a very large load. Fuel costs from Launceston to Hobart quickly eat the rate difference, especially for a single residential load. The exception is high-value loads of clean copper or brass — for loads above a few hundred kilograms of clean material, the maths can work out. For everything else, consolidate locally and accept the 0.83× rate.
Other metals in Launceston
Stainless Steel in other cities
- Stainless Steel in Adelaide (0.95×) →
- Stainless Steel in Albury (0.90×) →
- Stainless Steel in Ballarat (0.93×) →
- Stainless Steel in Bendigo (0.92×) →
- Stainless Steel in Brisbane (0.97×) →
- Stainless Steel in Canberra (0.93×) →
- Stainless Steel in Central Coast (0.94×) →
- Stainless Steel in Darwin (0.78×) →