Scrap Stainless Steel Prices in Geraldton

Today's estimated payouts in Geraldton range from $1.09 per kilogram (304 stainless) up to $1.18 (316 stainless). Prices update daily and reflect Geraldton's 0.83× regional adjustment from the Sydney benchmark. See the grades table above for all payouts.

Check the Geraldton yard directory for addresses and phone numbers, then call 2-3 yards before transport. Most Geraldton yards accept stainless steel in all common grades, though smaller yards may have minimum weight requirements. For larger loads, also consider yards in Perth.

Transport cost. Stainless Steel sold in Geraldton eventually travels to a smelter or export port — typically via Perth — and yards price the freight cost into their offer. The 0.83× regional adjustment models this transport drag based on observed yard rates and distance to processing facilities.

Geraldton yards use the same grading system as the rest of Australia: 304 Stainless, 316 Stainless. The grade depends on cleanliness, alloy purity, and contamination. See our complete <a href="/metals/stainless/">Stainless Steel grading guide</a> for what each grade means, examples, and how to identify it.

For copper, copper alloy, gold or silver, the licensed dealer must verify the seller's identity to at least 100 points using the checks in regulation 13 (photo documents score higher). For steel, aluminium and other scrap outside the Act no statutory ID requirement was found, although yards may set their own. (No scrap-specific Act. The Pawnbrokers and Second-hand Dealers Act 1994 and Regulations 1996 apply; last checked 2026-09-02.)

No cash ban. The licensing change that took effect on 1 December 2020 did not stop cash payment (as reported by the building industry's PACT Site Security), although licensed dealers must record and report copper and copper alloy transactions. (Last checked 2026-09-02.)

Generally no, unless you have a very large load. Fuel costs from Geraldton to Perth quickly eat the rate difference, especially for a single residential load. The exception is high-value loads of clean copper or brass — for loads above a few hundred kilograms of clean material, the maths can work out. For everything else, consolidate locally and accept the 0.83× rate.